When running a virtual machine, VM hereafter, it’s quite often to communicate between a Guest and the Host. For example, here we would like to transfer some files from the Host to the IGT-20 Toolchain Guest. There’s also another possibility, such a...
Category: en
How to Create a New VirtualBox VM Using a Exisiting Disk File
After VirtualBox is installed, open it and click New. A Create Virtual Machine Window will pop up. If Guided Mode shows up, click Export Mode. Otherwise, ignore this step. Once getting into the Expert Mode, select the type of OS (here for example Linux) and ve...
Make IGT-20 SD with Win32 Disk Imager
It’s very common for users of embedded system, such as Raspberry Pi, Beaglebone and IGT-20, to use or upgrade to different OS. Of course, the first task is to get or build an OS image file, which is not covered in this article. Assuming that OS image is ...
Using Nuvo-2510VTC Reading and Sending OBD-II Message over CAN Bus
Neousys Technology has released its Nuvo-2510VTC, an in-vehicle fanless computer with built-in Intel Bay Trail processor. As a product for in-vehicle applications, Nuvo-2510VTC provides several specific features, such as ignition power control, shock-absorbing...
Using devmem2 on IGT-20
In many cases using an embedded system like the IoT Gateway IGT-20 from Neousys, one might need to read and write memory directly. There is a simple tool named devmem2, which origins from Jan-Derk Bakker. Since the original link of the source file seems broken...